Feed Silos
Galvanised silos that store bulk feed beside the pig house and feed the lines.
Automatic Feeding Systems · E03
Auger Feeding Systems
Auger conveyors that move feed from silos to hoppers and feeding lines.
- Simple and strong feed transport
- Works with meal and pellet
- Run length and angle set by the plant
Sizes and configuration are customised to the project; details are agreed with you before quotation.
Overview
An auger uses a rotating screw in a tube to move feed. It is a simple and strong way to link a silo with a hopper or a feeding line, and it works with both meal and pellet. Tubes are chosen to the capacity needed and to the length and angle of the run.
Features
- 01
Simple and strong
A rotating screw in a tube is a robust way to move feed.
- 02
Meal and pellet
Works with both feed forms.
- 03
Flexible routes
Runs at an angle or horizontally to link silos and hoppers.
Specifications
Typical reference values. Final dimensions, materials and configuration are customised to your project and confirmed with you before quotation.
| Characteristic | Description |
|---|---|
| Principle | Screw conveyor in a tube |
| Feed form | Meal or pellet |
| Material | Galvanised steel tube, steel screw |
| Drive | Electric motor |
| Capacity | Set by tube and screw size |
| Customisation | Yes. Sizes, materials and configuration are adapted to the project. |
| Installation | Supported by HNYZ installation teams; scope agreed per project. |
| Packing and transport | Packed for sea or road shipping; method agreed per order. |
| Warranty | Agreed per project. |
| Certificates | Please ask for the documents required in your market. |
Where it is used
- Silo to hopper transport
- Linking mill and farm silos
- Feeding small houses
Why HNYZ Group
One company for planning, supply and installation, so the equipment fits the rest of the farm.
- 50
- Installation teams
- 3,000
- Completed projects
- 50+
- Countries served
Service
Pre-sales
- Requirement analysis
- Layout and equipment list
- Quotation agreed in detail
Installation
- Installation by HNYZ installation teams
- Commissioning and testing
- Staff training
After-sales
- Spare parts list with the order
- Technical support
- Support for expansion
Frequently asked questions
Does the auger damage pellets?
Slow speeds and the right screw size keep damage low. Tell us the pellet type.
How long can an auger be?
Length depends on diameter and angle; long runs may need several stages.
Can one system serve all stages of production?
Usually the same silo and line concept is used throughout, with different feeders and portion settings for each stage.
What feed types work with the lines?
Meal and pellet feed are common. Tell us the feed form so the right line and feeders are chosen.
Can the system be extended later?
Yes, if the plan allows for it. We can size silos and lines for future expansion.
Can I use my own feed mill with the line?
Yes. Bulk trucks or augers carry the finished feed to farm silos, which feed the lines.
What power does a feeding line need?
A gear motor per line, plus controls. We list the power with the design.
Are sizes and configurations fixed?
No. Dimensions, materials and configuration are customised to your herd size, climate and local rules, and agreed with you before quotation.
Are the specifications on your product pages final?
They are typical reference values to help you compare. Final specifications are confirmed with you before quotation.
Who installs the equipment?
Our installation teams install and commission the equipment. The scope for each project is agreed in the contract.
What warranty do you give?
Warranty terms depend on the equipment and are agreed per project in the contract.
Enquiry
Ask about this product
Send us your herd size, site and timeline. We reply with a recommended configuration and a quotation.
What happens next
- 1
You send your project details
Herd size, site, land and target start date. Rough numbers are enough.
- 2
We reply with a layout and an equipment list
Our team reviews your requirements and proposes a configuration.
- 3
We agree the details with you
Sizes, materials and scope are confirmed before any quotation.
- 50
- Installation teams
- 3,000
- Completed projects
- 50+
- Countries served
- Email: sales@hnyzgroup.com
- +86 185 3894 3078
- Jiaozuo City, Henan Province, China
- Founded in 2005 · 300 employees
- Factory visits welcome: contact us to arrange
More in Automatic Feeding Systems
Chain-Disc Feeding Lines
Pipe-and-disc feeding lines that carry feed from the silo to every pen.
Feed Dosing Cups
Adjustable dosing cups that give each sow or pig a measured portion.
